ATEX heat blankets for metal files 200l (“rsfux” series) and plastic, container ibc 
Among the most efficient heat transmission methods for drum heating in explosion area (ATEX), there are the ATEX electric heat blankets / ATEX barrel heaters.
Description
The ATEX series “RSFUX” series heaters are specially designed and certified ATEX, Zone 2, covered in ATEX 94/9 / EC, to ensure safe fluid containment in metal drums, avoiding the accidental formation of condensation and / or freezing.
These ATEX thermal blankets are characterized by high thermal efficiency, thanks to a uniform thermal exchange guaranteed by a dynamic heat emission; This is why they are often preferred to traditional band heaters, being much less absorbed by their power consumption.
Technical data
- Power supply voltage: 115VAC or 230VAC, 50-60Hz
- Standard Power: 1050W
- Standard size: for 200L drums. (dimensions 1990×800 mm)
- Protection index: IP65 degree
- Enveloping 3D design for perfect fit to the barrel-barrel cylindrical surface to be heated and optimal heat transfer.
- Made with hydrophobic materials: hydrophobic elastomer insulation, D = 20 mm
- Coating material: E-Glass, PTFE impregnated, conductive, black color, to ensure maximum reliability, resistant to basic agents, acids, solvents, etc … besides being silicone-free; Specific surface resistivity <3 * 105 Ω
- Closure system: 360 ° through yellow belts with quick-release release Clamping belts with adjustable hooks to ensure optimum winding of barrel / barrel as well as easy handling.
- Heating circuit: self-regulating parallel heating cable, positive temperature coefficient and dynamic output EExe II T5 – Electrical connection with EExe II2G / D certified integrated plug for direct connection to 230VAC mains, single phase / N / PE
- Electrical connection: IP65 coated polyurethane (PUR) orange color with cutting and snap protection 3 wires x sect. 1.5 mm² x Length. 5 meters covered with silicone impregnated in glass (all together sensor cables, cable and sheaths)
- n ° 2 handles to allow easy handling of the thermal blanket, as well as hooks on top to secure the blanket at the top of the stem
- Suitability for ATEX zone with room temperature: -15ºC to + 35ºC
- Permissible drum temperature:
-20 … + 85 ° C (blanket off / off),
-20 … + 65 ° C (Covered ON / ON): if the barrel has already been heated (eg in pre-heating), it must not exceed the temperatures indicated
- Degree of protection: U (with protected conductor)
- Zone ATEX: 2 (gas)
- Temperature class: T5
- Standards and Standards:
ATEX 94/9 / EG, DIN EN 13463-1, DIN EN 60079-30, DIN EN 60079-0, DIN EN 60079-7, DIN EN 13463-1
- Marking: II3G Ex-e II T5
- Integrated temperature sensor: PT100 (standard) ATEX II3G Ex nA T4, length 5 meters, silicon insulated
- Options:
Insulated ATEX cover for barrel 200L barrel; tThermocouple (optional) ATEX II3G Ex nA T4, length 5 meters, silicon insulated;
ATEX miniature thermoregulator (IP66, degree of protection: I), suitable for installation in ATEX 1 (Gas), 21 (Powders), & 2 (Gas), 22 (Powders), temperature class: T4, suitable for wall mounting (range control temperature: -0 … + 450 ° C), Ambient temperature: -20 … + 40/55 ° C – 25A (up to + 40 ° C) / 16 ° (up to + 55 ° C); accuracy of control: +/- 1K; aluminum housing gray (dimensions x width x depth: 160x160x105 mm) with sensor inputs: 1x PT100, 2- or 3-wire, intrinsic safety, temperature sensor monitoring, overheating protection, LED light , Low alarm, External fault message via zero-cutting differential 5 ° / 250 VAC, 1-Ph. / N / PE, 50 … 60Hz; ATEX Marking: II2G Eex and ib [ib] mb IIC T4 Gb, II2D EEx TB IIIC T90 ° C Db, Standards and Standards: ATEX 94/9 / EG, EMV 2004/108 / EG, DIN EN 60079-0 / -7 / -11 / -18 / -30-1 / -31, DIN EN 61000-6-2 / -6-4.
ATEX THERMAL COVER FOR IBC CONTAINERS (1000 Liters) (“RSFCX” series)
Description
ATEX Thermal Coverlets for 1000 Liters Capacity IBC (Intermediate Bulk Container) and Dimensions (length x width x height) 1200x1000x1170 mm are suitable for heating this type of containers in the explosion zone (ATEX) efficiently and homogeneously. .
This type of special heaters is specifically designed and certified to ATEX, Zone 2, in full compliance with ATEX 94/9 / CE, to safely heat fluids contained in IBC containers, and / or eliminate accidental condensation and / or freezing.
These ATEX thermal blankets are characterized by high thermal efficiency, thanks to a uniform thermal exchange guaranteed by a dynamic heat output.
Extremely easy in installation and high thermal efficiency to ensure high performance heating and constant temperature maintenance of industrial materials up to max. 80/90 ° C.
Technical data
- Power supply voltage: 115VAC or 230VAC, 50-60Hz
- Standard Power: 1500W
- Standard format: for IBC 1000L containers. (size 4400×1000 mm)
- Protection index: IP65 degree
- Enveloping 3D design for perfect fit to the barrel-barrel cylindrical surface to be heated and optimal heat transfer.
- Made with hydrophobic materials: hydrophobic elastomer insulation, D = 20 mm
- Coating material: E-Glass, PTFE impregnated, conductive, black color, to ensure maximum reliability, resistant to basic agents, acids, solvents, etc … besides being silicone-free; Specific surface resistivity <3 * 105 Ω
- Closure system: 360 ° through yellow belts with quick-release release Clamping belts with adjustable hooks to ensure optimum winding of barrel / barrel as well as easy handling.
- Heating circuit: self-regulating parallel heating cable, positive temperature coefficient and dynamic output EExe II T5 – Electrical connection with EExe II2G / D certified integrated plug for direct connection to 230VAC mains, single phase / N / PE
- Electrical connection: IP65 coated polyurethane (PUR) orange color with cutting and snap protection 3 wires x sect. 1.5 mm² x Length. 5 meters covered with silicone impregnated in glass (all together sensor cables, cable and sheaths)
- n ° 2 handles to allow easy handling of the thermal blanket, as well as hooks on top to secure the blanket at the top of the stem
- Suitability for ATEX zone with room temperature: -15ºC to + 35ºC
- Permissible drum temperature:
-20 … + 85 ° C (blanket off / off);
-20 … + 65 ° C (Covered ON / ON): if the barrel has already been heated (eg in pre-heating), it must not exceed the temperatures indicated
- Degree of protection: U (with protected conductor)
- Zone ATEX: 2 (gas)
- Temperature class: T5
- Standards and Standards:
ATEX 94/9 / EG, DIN EN 13463-1, DIN EN 60079-30, DIN EN 60079-0, DIN EN 60079-7, DIN EN 13463-1
- Marking: II3G Ex-e II T5
- Integrated temperature sensor:
PT100 (standard) ATEX II3G Ex nA T4, length 5 meters, silicon insulated
- Options:
Insulated ATEX cover for barrel 200L barrel; thermocouple (optional) ATEX II3G Ex nA T4, length 5 meters, silicon insulated;
ATEX miniature thermoregulator (IP66, degree of protection: I), suitable for installation in ATEX 1 (Gas), 21 (Powders), & 2 (Gas), 22 (Powders), temperature class: T4, suitable for wall mounting (range control temperature: -0 … + 450 ° C), Ambient temperature: -20 … + 40/55 ° C – 25A (up to + 40 ° C) / 16 ° (up to + 55 ° C); accuracy of control: +/- 1K; aluminum housing gray (dimensions x width x depth: 160x160x105 mm) with sensor inputs: 1x PT100, 2- or 3-wire, intrinsic safety, temperature sensor monitoring, overheating protection, LED light , Low alarm, External fault message via zero-cutting differential 5 ° / 250 VAC, 1-Ph. / N / PE, 50 … 60Hz; ATEX Marking: II2G Eex and ib [ib] mb IIC T4 Gb, II2D EEx TB IIIC T90 ° C Db, Standards and Standards: ATEX 94/9 / EG, EMV 2004/108 / EG, DIN EN 60079-0 / -7 / -11 / -18 / -30-1 / -31, DIN EN 61000-6-2 / -6-4.
Some examples:
